HOME > Products > B6-16/27/32


Products Info:B6-16/27/32

B6-16/27/32(CNC-Multi spindle machine Bar Type)
6 Spindle Lathe Bar Type with Back Spindle/Easy Set up by CNC Slides

There are 3 models depends on bar stock size
B6-16: φ4-16(φ0.16-φ0.63")
B6-27: φ10-27(φ0.4-φ1.06")
B6-32: φ32(-φ1.26")


  1. The number of max CNC slides is 3 ( X1 / Z1 , X2 / Z2 , X3 / Z3 ).
    0 CNC slide
    1 CNC slide 2 axes Fanuc control (X1 / Z1)
    2 CNC slides 4 axes Fanuc control (X1 / Z1 , X2 / Z2)
    3 CNC slides 6 axes Fanuc control (X1 / Z1 , X2 / Z2 , X3 / Z3)
    * Select the model to best meet your machining requirement.
  2. Easier (tooling) set up due to camless drive mechanism
    a) The CNC operation completely eliminates the need for expensive, time-consuming designing and verification of cams. b) Presetting may be done outside the machine by using Quick Change Tool Holder. c) CNC control is optionally available for the Main End Tool Slide, Cross-Slide, and Back Spindle for even easier and more accurate feed control.
  3. Bar Feeder
    a) An automatic Bar Loading System comes standard with each bar feeder.
    b) Bar remnant are automatically ejected at the rear end of the bar.
    * Bar feeders are to be chosen from Pietro Cucchi or IEMCA brands.
  4. High Accuracy
    As with any CNC, the dimensional requirements are easily maintained with use of the tool offsets.
  5. High Rigidity
    The main end tool slide is guided along chevron-type (V-shaped) slideways which are supported by three-point. Rigid box construction with hardened and hand scraped box slide way.
  6. The most wide tooling zone and chip floor in multi-spindle industry


Function Item Model
B6-16 B6-27 B6-32
Spindle Number 6
Bearing I.D. φ55(φ2.2") φ70(φ2.8")
Max.Spindle Speed 5000r.p.m. 3000r.p.m.
Bar Capacity Max. Bar Diameter φ4-φ16
Max.Feed Length 120mm(4.7")
Max.Bar Length 3.3M(130") Optional:4.3M(170")
End Tool Slide Drive System Camless Hydraulic(NC Servo)
Tool Diameter φ55(φ2.2")
Stroke 250mm(9.84")
Back Spindle
Drive System NC Servo
Max. Stroke 150mm(5.9")
Max.Collet Chuck Dia. φ16(φ0.63") φ25(φ1") φ32(1.25")
Machine Weight
(w/o bar feeder)
With 2 NC Slide 4800kg
Function Item Without NC 1 NC Slide 2 NC Slide 3 NC Slide
Cross Slide Drive System Camless Hydraulic
Stroke Pos.1 25mm(1") for Cut-off
Pos.2 40mm(1.6")
Pos.3 40mm
Pos.4 25mm(1")  
Pos.5 25mm(1")  
Pos.6 25mm(1")
NC Slide
Pos.4 X-Axis Stroke   120mm(4.7")
Z-Axis Stroke   120mm(4.7")
Pos.5 X-Axis Stroke   70mm(2.75")
Z-Axis Stroke   60mm(2.36")
Pos.6 X-Axis Stroke   50mm
Z-Axis Stroke   50mm
2SI-6/8 2SI-10 HS4200 VT4-350 ISM B6 SERIES B6 SERIES CN660 CN660-DSP SC-6E SS-8